9 Comments

  1. Forward Acting Rupture Discs. In forward acting rupture discs, the domed side of the disc faces away from the process. At REMBE ® we also use state-of-the-art laser production techniques when manufacturing forward acting rupture discs.. With a wide choice of materials and designs, we can supply the perfect rupture disc for every application – customized for your process.
  2. A recent incident involving a rupture disk pointed out some of these problems. A vessel was rated at pounds per square inch (psi) at ° F, and a rupture disk was specified with a set pressure of psi at ° F. The process fluid was mostly steam, and at psi, the saturation temperature of steam is .
  3. Rupture Discs for Pressure Relief Protecting against Overpressure Hazards Since Every Fike rupture disc has a story to tell. It’s a story about our proprietary pre-engineered manufacturing that maximizes disc reliability. Our early adoption of the latest technologies to enhance quality and efficiency.
  4. The rupture disc must be marked at a pressure within the manufacturing range. The manufac-turing ranges available are defined in the product literature for each rupture disc model. Rupture discs are typically manufactured to order where each order represents a lot. The ASME Code defines 3 methods of acceptance testing for rupture discs. The.
  5. rupture disk. Factors such as operating pressure, ma-terial selection, etc. have a significant influence on the type of rupture disk selected. Failure to select the correct rupture disk for an application can result in significant plant down time due to “nuisance fail-ures”. In a worst case scenario, an improperly speci-.
  6. on black vinyl with black and white sleeve on clear vinyl with multicolor splatter and black and white sleeve 40 on clear vinyl with multicolor splatter and orange sleeve 1 copy on clear vinyl with black and white sleeve 20 test pressings with alternate sleeve Some copies include an additional Dropdead /5(21).
  7. Extruder Rupture Disc Extruder, Forward Acting. The Fike Extruder Rupture Disc Device or ERD, also known as a Blow Out Plug, is a pressure relief device primarily designed for overpressure protection of plastic extrusion terckoveaworkbuslapekamarimtamat.xyzinfoer Rupture Disc applications are unique, each requiring a specific combination of dimensions, threading and body configuration.
  8. Just like other mechanical equipment, it may be apt to think that maintenance would allow a rupture disk to be reused. However, as a rupture disk is a passive device with no moving parts, there is no maintenance that can be performed to extend the service life. Generally, ZOOK suggest that a rupture disk be replaced yearly provided that there is no material degradation due to corrosion or.
  9. /8" Rupture Disc psig Burst Pressure Mersen S $ Continental Disc TYPE ZAP 64psi 6in Rupture Disc. $ Fike GI MRK Rupture Disc Holder 4in $ Box Of 7 Bs&b Rupture Disc psi 4in. $ Fike 6in Stainless Rupture .

Leave a Reply

Your email address will not be published. Required fields are marked *